On the Achievable Rates of Decentralized Equalization in Massive MU-MIMO Systems

Massive multi-user (MU) multiple-input multiple-output (MIMO) promises significant gains in spectral efficiency compared to traditional, small-scale MIMO technology. Linear equalization algorithms, such as zero forcing (ZF) or minimum mean-square error (MMSE)-based methods, typically rely on centralized processing at the base station (BS), which results in (i) excessively high interconnect and chip input/output data rates, and (ii) high computational complexity. In this paper, we investigate the achievable rates of decentralized equalization that mitigates both of these issues. We consider two distinct BS architectures that partition the antenna array into clusters, each associated with independent radio-frequency chains and signal processing hardware, and the results of each cluster are fused in a feedforward network. For both architectures, we consider ZF, MMSE, and a novel, non-linear equalization algorithm that builds upon approximate message passing (AMP), and we theoretically analyze the achievable rates of these methods. Our results demonstrate that decentralized equalization with our AMP-based methods incurs no or only a negligible loss in terms of achievable rates compared to that of centralized solutions.Comment: Will be presented at the 2017 IEEE International Symposium on Information Theor

VLSI Architectures and Rapid Prototyping Testbeds for Wireless Systems

The rapid evolution of wireless access is creating an ever changing variety of standards for indoor and outdoor environments. The real-time processing demands of wireless data rates in excess of 100 Mbps is a challenging problem for architecture design and verification. In this paper, we consider current trends in VLSI architecture and in rapid prototyping testbeds to evaluate these systems. The key phases in multi-standard system design and prototyping include: Algorithm Mapping to Parallel Architectures – based on the real-time data and sampling rate and the resulting area, time and power complexity; Configurable Mappings and Design Exploration – based on heterogeneous architectures consisting of DSP, programmable application-specific instruction (ASIP) processors, and co-processors; and Verification and Testbed Integration – based on prototype implementation on programmable devices and integration with RF units.Nokia Foundation FellowshipNokia CorporationNational InstrumentsNational Science Foundatio

Large-Scale MIMO Detection for 3GPP LTE: Algorithms and FPGA Implementations

Large-scale (or massive) multiple-input multiple-output (MIMO) is expected to be one of the key technologies in next-generation multi-user cellular systems, based on the upcoming 3GPP LTE Release 12 standard, for example. In this work, we propose - to the best of our knowledge - the first VLSI design enabling high-throughput data detection in single-carrier frequency-division multiple access (SC-FDMA)-based large-scale MIMO systems. We propose a new approximate matrix inversion algorithm relying on a Neumann series expansion, which substantially reduces the complexity of linear data detection. We analyze the associated error, and we compare its performance and complexity to those of an exact linear detector. We present corresponding VLSI architectures, which perform exact and approximate soft-output detection for large-scale MIMO systems with various antenna/user configurations. Reference implementation results for a Xilinx Virtex-7 XC7VX980T FPGA show that our designs are able to achieve more than 600 Mb/s for a 128 antenna, 8 user 3GPP LTE-based large-scale MIMO system. We finally provide a performance/complexity trade-off comparison using the presented FPGA designs, which reveals that the detector circuit of choice is determined by the ratio between BS antennas and users, as well as the desired error-rate performance.Comment: To appear in the IEEE Journal of Selected Topics in Signal Processin

Distributed Decoding in Cooperative Communications

In this paper, we present a novel relaying strategy called distributed and partial decoding. This strategy can be viewed as a variation of the decode and forward with the difference that the relay partially decodes the signal, re-transmits it to the destination, and the destination continues the decoding. By distributing the decoding process between the relay and the destination, the relay uses less processing power and less time. This is very suitable for practical applications in which relays are battery-operated (such as handsets) and do not want to use all their battery power on relaying the data of other users.Nokia CorporationNational Science Foundatio

Scalable Architecture of MIMO Multi-carrier CDMA System on Programmable Logic

In this paper, a scalable architecture of the multicarrier CDMA system using Multiple-Input-Multiple-Output (MIMO) technology is designed in the programmable logic array. The system-level partitioning with different architecture design entries is described. The overall computing architecture for complex signal processing blocks, e.g., channel estimation, frequency domain equalization, demodulation etc is described. The MIMO architecture is easily extended from a SISO system with single antenna. This scalable architecture demonstrates resource utilization efficiency and easy extension to MIMO configurations

Soft Sphere Detection with Bounded Search for High-Throughput MIMO Receivers

We propose a soft sphere detection algorithm where search-bounds are determined based on the distribution of candidates found inside the sphere for different search levels. Detection accuracy of unbounded search is preserved while significant saving of memory space and reduction of latency is achieved. This probabilistic search algorithm provides significantly better frame-error rate performance than the soft K-best solution and has comparable performance and smaller computational complexity than the bounded depth-first search method. Techniques for efficient and flexible architecture design of soft sphere detectors are also presented. The estimated hardware cost is lower than the hardware cost of other soft sphere detectors from the literature, while high detection throughput per channel use is achieved